Contracor Nozzles / Angel Nozzles

Contracor Nozzles / Angel Nozzles

Contracor Nozzles / Angel Nozzles

ANGLE BLAST NOZZLES ATC

Angled nozzles are used to enter narrow or hard-to-reach places such as corners, flanges or inside pipes. ATC type angled nozzles are compact and hit the abrasive at 45 ° angles. It is made of tungsten carbide (TC). Fits all Contracor nozzle holders.

Properties

Highly wear-resistant angled type sandblasting nozzles. It is made of tungsten carbide (TC). Lifetime: Up to 400 hours. Jacket: Rubber. Thread: 50 mm thick rubber thread.

Order Codes

10112511ATC-5.0-1Angle nozzles, tungsten carbide, bore 1×45°
10112512ATC-6.5-1Angle nozzles, tungsten carbide, bore 1×45°
10112513ATC-8.0-1Angle nozzles, tungsten carbide, bore 1×45°
10112514ATC-9.5-1Angle nozzles, tungsten carbide, bore 1×45°
10112521ATC-5.0-2Angle nozzles, tungsten carbide, bore 2×45°
10112522ATC-6.5-2Angle nozzles, tungsten carbide, bore 2×45°
10112523ATC-8.0-2Angle nozzles, tungsten carbide, bore 2×45°
10112524ATC-9.5-2Angle nozzles, tungsten carbide, bore 2×45°
10112531ATC-5.0-3Angle nozzles, tungsten carbide, bore 3×45°
10112532ATC-6.5-3Angle nozzles, tungsten carbide, bore 3×45°
10112533ATC-8.0-3Angle nozzles, tungsten carbide, bore 3×45°
10112534ATC-9.5-3Angle nozzles, tungsten carbide, bore 3×45°

ANGLE BLAST NOZZLES BTC

Bending nozzles are used to enter narrow or hard-to-reach places such as corners, behind flanges or inside pipes. BTC-type bending nozzles are compact and hit the abrasive at 45 ° angles. It is made of tungsten carbide (TC). Fits all Contracor nozzle holders.

Properties

Highly wear-resistant angled type sandblasting nozzles. It is made of tungsten carbide (TC). Lifetime: Up to 400 hours. Jacket: Aluminum / Polyurethane protector. Thread: 50 mm thick rubber thread.

Order Codes

10112582BTC-8.0Bending nozzle, tungsten carbide, angle 450, 8.0 mm x 125 mm
10112583BTC-9.5Bending nozzle, tungsten carbide, angle 450, 9.5 mm x 125 mm
10112584BTC-11.0Bending nozzle, tungsten carbide, angle 450, 11.0 mm x 125 mm
10112585BTC-12.5Bending nozzle, tungsten carbide, angle 450, 12.5 mm x 125 mm

NTERNAL PIPE BLAST NOZZLES 360°

PTC-360 ° type inner tube spray nozzles, 2.5 “to 5” I.D. It is designed to clean the interior of the pipes ranging from. (60mm bis 125mm). During operation, the PTC-360 ° nozzle directs the air / abrasive mixture to a deflection tip. This tip allows the spray pattern to ventilate into a wide, circular pattern that cleans inside the pipe as it passes through the nozzle. It is made of tungsten carbide (TC). Fits all Contracor nozzle holders.

Properties

Highly wear-resistant angled type sandblasting nozzles. It is made of tungsten carbide (TC). Lifetime: – Up to 400 hours. Jacket: Aluminum. Thread: Aluminum, 50 mm for NHP nozzle holder.

Order Codes

10112590PTC-360°Internal pipe blasting nozzle, tungsten carbide, 8.0mm x 75mm
29010007Deflection tip for PTC- 360°, tungsten carbide (TC)

INTERNAL PIPE BLAST NOZZLES 360°L

PTC-360 ° L type inner tube spray nozzles, 3/4 “to 2” I.D. It is designed to clean the interior of the pipes ranging from. During operation, the PTC-360 ° L nozzle directs the air / abrasive mixture to a deflection tip. This tip allows the spray pattern to ventilate into a wide, circular pattern that cleans inside the pipe as it passes through the nozzle. The length of the working area is 200 mm. It is made of tungsten carbide (TC). Fits all Contracor nozzle holders.

Properties

Highly wear-resistant angled type sandblasting nozzles. It is made of tungsten carbide (TC). Lifetime: – Up to 400 hours. Jacket: Aluminum. Thread: Aluminum, 50 mm for NHP nozzle holder.

Order Codes

10112595PTC-360°LInternal pipe blasting nozzle, tungsten carbide, 5.0 mm x 200 mm
29002001Exchangeable deflection tip for PTC- 360°L, tungsten carbide (TC)