Hoses

Hoses

Hoses

Sel Sandblasting Hoses

Sandblasting hose should be used to transport the sand-air mixture coming from the pressure blasting machine to the material to be sandblasted. However, during transport of the sand / air mixture, the inner surface of the blasting hose wears. For this reason, it is not necessary to use any hose for the blasting process. SEL brand sandblasting hoses that we distribute to be used in blasting process are special sandblasting hoses with high endurance and high wall thickness. During the blasting process, blasting hoses should be preferred according to the size.

Sandblasting hoses are offered for sale as a total of 20 to 40 meters in tie form. We produce in desired quantity with special order. Sandblasting hose size 11/4 ″ (32 * 48) and 1 ″ inch (25 * 39 mm) are used as standard. However, we should also note that blasting hose with larger hore diameter is not advantageous in the selection of blasting hose, on the contrary, it has harm. Hoses with a hole diameter larger than 1 ″ and 11/4 seem to allow more blasting, but this will not be the case during application. It is not the hole diameter of the hose that determines the blasting speed and amount, but the hole diameter of the sandblasting nozzle. Increasing the blasting hose diameter is nothing but putting an extra load on the operator. For this reason, 1” and 11/4 ″ sized blast hoses are the most ideal and preferred efficient blast hoses. You can also see the hose details in the table below.

 

ID

OD

WP

BP

BR/r

W

L

inchmmmmbarpsibarpsimmg/mm
1/2”12.725121743652212541440-46-61
1/2”12.727121743652212549540-46-61
5/8”1628121743652215047640-46-61
5/8”1630121743652215057840-46-61
3/4”1930121743652219048640-46-61
3/4”1931121743652219053040-46-61
3/4”1933121743652219065340-46-61
1”25.439121743652225081340-46-61
11/4”32481217436522320116040-46-61
11/2”38541217436522380133740-46-61
13/4”44.5601217436522445146840-46-61
13/4”44.5631217436522445182040-46-61
2”50.8691217436522500203040-46-61
2”50.8731217436522500248440-46-61
21/2”63.5821217436522630262640-46-61
3”76.2961217436522760309040-46-61
4”101.612212174365221000422040-46-61

Sel Compressor Hoses

It is used in the use of pressure lines for the Blasting Boiler. It is the air hose that provides the air between the compressor and the blast boiler. Air hose is used in intended dimensions.

ID

OD

WP

BP

W

L

inchmmmmbarpsibarpsig/mm
1/2”12.722101454058040040-46-61
5/8”1625101454058044440-46-61
3/4”1929101454058056440-46-61
1”25.436101454058066140-46-61
11/4”32441014540580105140-46-61
11/2”38511014540580134140-46-61
13/4”44.5571014540580142640-46-61
2”50.8631014540580161940-46-61
21/2”63.5781014540580236840-46-61
3”76.2921014540580307440-46-61
4”101.61171014540580382840-46-61

Mask Oxygen Hose

It is a type of hose that allows the operator to breathe more easily inside the blasting mask when sandblasting. As Standart 8mm and 10mm are used

Oxygen Hose
Inner DiaOuter DiaWorking PressurePBWeihjt
inchmmbarbarbar
1/4″132060155
5/16″152060185
3/8″172060220

Sel Pneumatic Hose 6-8mm or Contracor Twinline Hose

It is the twin hose that connects the latch and the Blasting pot  for automatic control of the blasting pot.

Sel Painting Hoses

Working pressure of double coiled paint hoses is between 350 and 750 bar.

SELPAINT HD Double Coiled and Wire Paint Hose
IDODWPEPKYÇ/rWEIGHT
inchmmbarbarmmgr/m
1/8″82279082550
5/32″92309209057
3/16″9,62309209062
1/4″11,820080010085
5/16″14190760115117
3/8″16,2175700125144
1/2″20150600180203
5/8″24,1105420205296
3/4″27,5100400240293
1″3470280300535

 

SELPAINT ST-1 Paint Hose
IDODWPEPKYÇ/rWEIGHT
inchmmbarbarmmgr/m
1/8″8,2325130020100
5/32″8,6300120040111
3/16″9,5293117290128
1/4″122871148100165
5/16″13240960115162
3/8″15,5212848125231
1/2″18,7185740180263
5/8″22,5150600205368
3/4″25,7125500140404
1″31,5100400400462

Sel Vacum Hoses

Vacuum Hose
Inner DiaOuter DiaWorking PressurePBVacumWeight
inchmmbarbarbargr/m
1″32-0,60417
1 1/4″39-0,60617
1 1/2″45-0,60721
1 3/4″52-0,60806
2″58-0,60912
2 1/2″72-0,601407
2 3/4″78-0,601500
3″84,5-0,601694
4″110-0,602336
5″135-0,603176
6″162-0,604171
8″214-0,606282
10″267-0,608795
12″315-0,6010430